WARRANTY
Limited Warranty on HYPRO/SHURFLO
Agricultural Pumps & Accessories
Hypro/SHURflo (hereafter, “Hypro”) agricultural products are warranted to be free of defects in material and workmanship
under normal use for the time periods listed below, with proof of purchase.
- Pumps: one (1) year from the date of manufacture, or one (1) year of use. This limited warranty will not
exceed two (2) years, in any event.
- Accessories: ninety (90) days of use.
This limited warranty will not apply to products that were improperly installed, misapplied, damaged, altered, or incompatible
with fluids or components not manufactured by Hypro. All warranty considerations are governed by Hypro’s written return
Hypro’s obligation under this limited warranty policy is limited to the repair or replacement of the product. All returns will
be tested per Hypro’s factory criteria. Products found not defective (under the terms of this limited warranty) are subject to
charges paid by the returnee for the testing and packaging of “tested good” non-warranty returns.
No credit or labor allowances will be given for products returned as defective. Warranty replacement will be shipped on a
freight allowed basis. Hypro reserves the right to choose the method of transportation.
This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is authorized to give any
other warranty or assume obligation or liability on Hypro’s behalf. Hypro shall not be liable for any labor, damage or other
expense, nor shall Hypro be liable for any indirect, incidental or consequential damages of any kind incurred by the reason of
the use or sale of any defective product.
All products must be flushed of any chemical (ref. OSHA section 1910.1200 (d) (e) (f) (g) (h)) and hazardous chemicals must
be labeled/tagged before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request
a Material Safety Data Sheet from the returnee for any pump/product it deems necessary. Hypro reserves the right to
“disposition as scrap” products returned which contain unknown fluids. Hypro reserves the right to charge the returnee for
any and all costs incurred for chemical testing, and proper disposal of components containing unknown fluids. Hypro requests
this in order to protect the environment and personnel from the hazards of handling unknown fluids.
Be prepared to give Hypro full details of the problem, including the model number, date of purchase, and from whom you
purchased your product. Hypro may request additional information, and may require a sketch to illustrate the problem.
Contact the appropriate Hypro Service Department to receive a Return Merchandise Authorization number (RMA#).
Returns are to be shipped with the RMA number clearly marked on the outside of the package. Hypro shall not be liable for
freight damage incurred during shipping. Please package all returns carefully. All products returned for warranty work should
be sent shipping charges prepaid:
*Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous material being
shipped. Failure to do so may result in a substantial fine and/or prison term. Check with your shipping company for specific
Attention: Service Department
Attention: Service Department
Attention: Service Department
Pentair Water do Brasil LTDA
Av. Marginal Norte da Via
Av. Marginal Norte da Via
Av. Marginal Norte da Via
Attention: Service Department
Attention: Service Department
Attention: Service Department
hypro.technical@pentair.com
375 Fifth Avenue
NW New Brighton, MN 55112 US
Phone: (651) 766-6300, 800-424-9776
Fax: 800-323-6496
pentair.com
Pentair trademarks and logos are owned by Pentair or its aliates. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously
improving our products and services, Pentair reserves the right to change specications without prior notice. Pentair is an equal opportunity employer.
L-1600 (04/01/21) ©2021 Pentair. All Rights Reserved.
To Previous Page
Loading...
