- 5-
Hypro roller pumps are designed to operate effectively within the specified speed, pressure and environmental ranges.
Going outside of these ranges will void the warranty and could cause damage to property, serious injury or death.
• DO NOT run the pump faster than the maximum recommended speed.
• DO NOT run the pump higher than the maximum recommended pressure.
• DO NOT run pumps when the liquid, or ambient air, has exceeded the maximum or minimum temperature limit.
(See Intended Uses)
• DO NOT pump non-approved liquids.
• DO NOT pump water or other liquids for human consumption.
• DO NOT operate any Hypro pump under the influence of drugs or alcohol.
• DO NOT run the pump dry.
• DO NOT pump abrasive fluids.
• DO NOT exceed the duty cycle for pumps with electric motors.
• DO NOT run the pump with a higher than recommended voltage.
Misuses
Pump Identification
Introduction - cont’d.
Hypro uses serialized labeling to enable users to precisely identify the pump’s manufacturing date.
Serial Number:
First and second digits: year (12 = 2012)
Third through fifth digits: consecutive day of the year the pump was manufactured.
To Next Page
Loading...
