Setting Backwash Press or to select Backwash Duration.
Press to access setting.
Duration
Press and to select digit to modify. Change values by pressing and
When value is set, press to confirm value and save changes.
Setting Rinse Press or to select Rinse Duration.
Duration
Press to access setting.
Press and to select digit to modify. Change values by pressing and
When value is set, press to confirm value and save changes.
Vacuum The Vacuum Mode quick launch button allows the pool owner or
pool professional to manually vacuum the pool. Vacuum Mode operates only in
flow control. Vacuum mode shuts off all sensors. CAUTION: Since vacuuming is
manual and the user will be at the pool, the “Blocked System” will be switched off.
It is important not to use any kind of automatic cleaner with Vacuum mode.
Enter
Enter
18
IntelliFlo
®
VF Pump Quick-Start Guide
To Next Page
Loading...
