16
KEYSTONE EPI-2 QUARTER-TURN ELECTRIC ACTUATOR
InstallatIon and MaIntenance InstructIons
SETUP BASE CARD
Rotary switches position Dip switch Enter button
Setup SW4 SW6 SW3 SW5 Default
Close limit 0 0 ON PUSH n.d.
Open limit 1 0 ON PUSH n.d.
L/S close 2 1: by position ON PUSH 1
2 0: by torque ON PUSH
L/S open 3 1: by position ON PUSH 1
3 0: by torque ON PUSH
Closing speed 4 4 ON PUSH 6
4 6 ON PUSH
4 8 ON PUSH
Opening speed 5 4 ON PUSH 6
5 6 ON PUSH
5 8 ON PUSH
% Closing torque 6 2: 50% ON PUSH 9
6 5: 75% ON PUSH
6 9: 100% ON PUSH
% Opening torque 7 2: 50% ON PUSH 9
7 5: 75% ON PUSH
7 9: 100% ON PUSH
CW/CCW 8 0: CW; ON PUSH 0
8 1: CCW; ON PUSH
Size 9 0: 63 Nm / 250 Nm ON PUSH 0
9 1: 125 Nm / 500 Nm ON PUSH
9 3: 1000 Nm ON PUSH
9 4: 2000 Nm ON PUSH
Nm / Lbs-in 0 8: Nm ON PUSH 8
0 9: Lbs-in ON PUSH
Blinker / Local Selector 4 0: Off ON PUSH 0
4 1: Blinker ON PUSH
4 2: Local Selector ON PUSH
Heater 8 9: Active ON PUSH 9
8 8: Not active ON PUSH
Inversion colours LED of local control 9 2 ON PUSH LED Open: Green
LED Close: Red
To Next Page
Loading...
