Pentair KREEPY KRAULY WARRIOR - Pool Preparation and Components; Pool Preparation Steps; Cleaner Components Identification

1
KREEPY KRAULY
®
WARRIOR™ Suction Side Pool Cleaner Installation and User’s Guide
KREEPY KRAULY
®
WARRIOR™ Suction Side Pool Cleaner Installation and User’s Guide
POOL PREPARATION
ENGLISH
1. Warrior cleaner body
2. Hose float
3. Eyeball diverters (2)
4. Valve cap
5. Regulator valve
6. Threaded compression adapter
7. Hose protector
8. Flow gauge
9. Vacuum line door
10. Hose Set – 13 Sections
---12 Standard Male/Female
Hoses
---1 Leader Hose
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
Pool Preparation
Before installing the Warrior™ Suction Side Pool Cleaner, your pool should be clean and algae-free so as to not
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
1.
8.
7.
6.
5.
4.
3.
2.
9.
Standard Hose
Leader Hose
10.
Figure 1