1
KREEPY KRAULY
®
Suction Side Pool Cleaner Installation and User’s Guide
KREEPY KRAULY
®
Suction Side Pool Cleaner Installation and User’s Guide
POOL PREPARATION
1. Kreepy Krauly cleaner
2. Hose weights (2)
3. Wings
4. Bumper assembly
5. Eyeball diverter and outer ring
6. Valve cap
7. Automatic regulator valve
8. Threaded compression adapter
9. Hose Protector
10. Pleated or flat seal
11. Hose – 12 Sections (not shown)
---11 Male/Female
---1 Female/Female
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
Pool Preparation
Before assembling and installing the Kreepy Krauly
®
Suction Side Pool Cleaner, your pool should be clean
and algae-free so as not to inhibit the cleaner’s traction. If necessary, make the following preparations before
proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
2.
4.
5.
1.
10.
9.
8.
Serial Number
11.
For Concrete Pools Only
Figure 1
6.
7.
8.
10.
9.
3.
To Next Page
Loading...
