13
EN
The volumetric air pump can be installed on any water pumping system that uses a centrifugal pump or jet.
4.3 MODELS WITH AIR PUMPS
• The tank (1) must be installed vertically
• Assemble the pump (2) onto the side
opening with female 1/2" thread
• The pump must be installed vertically
• Use a exible hose (3) to connect
the suction pump's outlet with the
suction point. A 3-way nipple (6) with
side opening and female 1/2" thread
is required
• Connect the 1" outlet of the tank with
the pump outlet
• A pressure switch (7) must be installed
on the discharge pipe, calibrated to
a maximum of pressure of no more
than 8 bar
• Ensure that all connections are
watertight
1) 24 LITRE TANK
2) PUMP
3) FLEXIBLE HOSE
4) SUCTION PUMP
5) SUPPLY VALVE
6) 3-WAY NIPPLE
7) PRESSURE SWITCH
8) STAINLESS STEEL BASE
EXAMPLE OF USE
To Next Page
Loading...
