EasyManua.ls Logo

Pentair ONGA FARMMASTER JJ Series - Technical Data

Pentair ONGA FARMMASTER JJ Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
IMPORTANT!
The operator must be provided with this owner’s manual. This must be read before
operation and followed during operation.
These instructions are a guide only. Users not familiar with pumping equipment should
seek advice from people with experience in pump installation and operation.
Model Data - JJ400, JJ600, OJ700 & OJ800
Technical Data
Voltage 230V / 415V
Motor Watts 750W (JJ400); 1800W (JJ600)
1800W (OJ700); 3000W (OJ800)
Suction / Discharge Refer Product Guide.
IP Rating
IP44
Motor Frequency 50Hz
Water temperature range 2 - 40
o
C
Maximum ambient temperature 40
o
C (for effective motor cooling
ensure the ambient temperature
does not exceed 40
o
C).
Incorrectly installed or tested equipment may fail,
causing severe injury or property damage.
Pump
Model
Supply
voltage
Phase
Nominal
Horsepower
Motor
input
power
(P
1
)
Starting
current
(Amps)
Full Load
current
(Amps)
Power
Supply
Lead
(Amps)
Outlet
(BSP)
JJ400 230 1 1 1 19 4.6 10A 3/4' F
JJ600 230 1 1.1/2 1.6 31.4 7.7 10A 3/4' F
JJ600 415 3 2.1/2 2.451 25 2.9 N/A 3/4' F
OJ700 230 1 2.1/2 2.61 47.5 8.9 10A 1' F
OJ700 415 3 2.1/2 2.451 25 3.6 N/A 1' F
OJ800 230 / 480 1 3.3/4 3.569 71.2 14 / 7 15A 1' F
OJ800 415 3 3.3/4 3.569 38.69 5.5 N/A 1' F

Related product manuals