11
H OInformer Display Options
2
The following information can be viewed by using the “mode” button
to scroll through the menu
1. Rain water usage in litres (indicated by tank icon)
2. Mains water usage in litres (indicated by tap icon)
3. Water savings in percentage (%) – Tank usage Vs Mains usage
4. Number of days usage since last reset
Resetting the H OInformer Stored Information
2
1. Press the “manual override” button on the WaterSwitch cover while
powering up the WaterSwitch. Red status light will blink 3 times,
acknowledging the switch activation
2. Release the switch within 2-3 seconds
3. Scroll through the H OInformer menu using the “mode” button. All water
2
usage, percentage saved and days should now read zero (O)
When resetting is complete, WaterSwitch will be communicating with the
H OInformer and this can be verified by the red LED on the WaterSwitch
2
blinking at 1 second intervals
H OInformer
2
To Next Page
Loading...
