Pentair Pool and Spa Control System SunTouch - Suntouch System Overview

39
SunTouch Pool and Spa Control System Installation and User’s Guide
SunTouch System Overview
• Pumps
Filter, Cleaner, Spa Jet -
1.5 HP 120 VAC
3 HP 277 VAC
20 FLA/120 LRA,120 VAC
17 FLA/102 LRA, 277 VAC
• Pool/Spa Lights
1.5 KW 120 VAC Tungsten
4.8 KW 240 VAC Tungsten
20 AMP, 277 VAC Ballast
• Pool/Spa Valve
Suction and return.
24 VAC valve actuator,
shared equipment only
• Valve actuators
Valve A (intake), Valve B
(return), Valve C (Solar)
• Heater
Gas, Electric, and Solar
• Relays
25 AMP, 277 VAC
Optional equipment
• IntelliChlor Salt Chlorine
Generator (SCG)
• IC20 P/N 520554/520556
• IC40 P/N 520555/520556
• Power Center
P/N 520556
• IntelliFlo 4x160
P/N 011013
(see page 30)
Temperature Sensors
(Water, Air and Solar)
SunTouch enclosure (with two
resettable circuit breakers
(18 VAC and 24 VAC).
Electrical Ratings:
Input:
120/240 VAC, 60/50 Hz,
820/410 mA maximum.
Output:
120 VAC, 20 FLA/120 LRA,
1.5 HP.
277 VAC, 17 FLA/120 LRA,
3.0 HP.
20 AMP Tungsten, 50/60 Hz.
QuickTouch (QT4)
Wireless remote kit
(P/N 520148)
(Optional)