Posi-Chlor® Salt Water Chlorinator Owner’s Manual Posi-Chlor® Salt Water Chlorinator Owner’s Manual
15
3. INSTALLATION OF THE EQUIPMENT
Terminal Description Notes
RELAY OUT Filter Pump Output (230VAC) Pre-wired in factory.
FILTER Not Used in Australian Version Pre-wired in factory.
1 & 2 Acid level sensor Not Used.
3 & 4 Pool cover input
Connection from pool cover control
(optional).
5 Water Sensor / Gas Sensor
Connection to water sensor in cell
(white cable).
5 & 6 External Flow Switch
Connection to external ow switch
(optional). Also, activate in the
conguration menu.
7 & 8 Temperature Probe
Connection to water temperature
sensor (optional)
9 & 10 ORP Sensor Pre-wired in factory.
11, 12, 13, 14 Not used
Class A Equipment:
This device is classified as Class A equipment
Warning: Operation of this equipment in a residential environment could cause radio
interference.
To Next Page
Loading...
