Posi-Chlor® Salt Water Chlorinator Owner’s Manual Posi-Chlor® Salt Water Chlorinator Owner’s Manual
17
When browsing through the menus, an arrow is displayed on the left hand side > which
indicates the selected line.
When there is more than one line to select, the buttons enable you to move the arrow
up or down to select the required option. The OK button confirms selection.
When a value has to be adjusted, for example the time or level of chlorine, the buttons
enable you to increase or decrease the value. Press the OK button to confirm the value.
4. START-UP AND ADJUSTMENTS
Key Description Notes
1 Alarm Light Will ash when there is an alarm condition. It may
also ashes briey during menu selections.
2 LCD Screen For setting and displaying parameters. Also see a-j.
3 Up and Down Buttons Used for navigating the menu's and altering values.
4 OK Button Entering Menu. Conrming selections.
a Chlorine Production Level Displays the current product level 0-100%.
b Cell Voltage Displays the cell voltage.
c Water Temperature Displays the current water temperature (with
optional water temperature sensor).
d Operating Mode Displays the selected operating mode; manual,
semi-auto or auto. Default is Manual
e Filter Pump Status Displays the status of the lter pump On or Off.
f ORP Level Displays the current ORP reading (with advanced
pH/ORP kit only).
g pH Level Displays the current pH reading (with advanced pH/
ORP kit only).
h Menu Press OK to access menu.
i Clock Displays the current time.
To Next Page
Loading...
