Posi-Chlor® Salt Water Chlorinator Owner’s Manual
20
ATTENTION: A password will be required when trying to change some options
of this menu, to avoid an involuntary change of some parameter that could
affect to the right behaviour of the unit. Password: 1234
4.3.1 Language
From the configuration menu select "Language", press the OK button, and once the required
language has been selected, press the OK button and EXIT. Choose between; English,
Spanish, Catalan, French, Italian, Dutch, Portuguese, Turkish, Hebrew, German, Czech,
Croatian or Indonesian.
4.3.2 Control
The equipment allows you to select from 4 different modes of control:
Manual: The equipment produces chlorine continuously, depending on the % of
production selected. If you have a fitted ADVANCED probe Kit probe, it will ignore its value
and chlorination will not stop even though the set value has been exceeded. When selecting
this mode, the equipment will ask if you want to display the value of the Redox probe (ORP)
on the main screen.
Select this mode if you do not have an ADVANCED (ORP) probe Kit, by adjusting production
and hours of filtering depending on the nature of your swimming pool, its volume number of
bathers and season of the year.
Automatic
Select this mode only if you have an ADVANCED probe Kit (ORP) . If you do not have a
probe, the equipment will act at random and end up by stopping and showing an error.
This mode enables you to automatically adjust the level of chlorine in your swimming pool.
Based on the adjusted set value in the "chlorine" menu, the equipment will stop when it
reaches this value, and start-up again automatically when there is a need for chlorine.
4. START-UP AND ADJUSTMENTS
To Next Page
Loading...
