Pentair PROWLER 930W - Introduction to Pentair Home; Pool Dashboard Overview

PROWLER® 930W Robotic Inground Pool Cleaner Installation and Maintenance Guide
1
Overview
Prowler
®
930W Robotic Inground Pool Cleaners are designed to scrub, vacuum, and filter your
inground pool. Before operating this product, be sure to read and follow all safety instructions on
pages i-ii.
Cleaner Components:
• Cleaner and 60 ft. Communication Cable
with Swivel
• Power Supply
• Cleaner Caddy
Cleaner Features:
• Weekly Timer
• Wall and Waterline Scrubbing
• Top Loading Basket Filtration
• Quick Clean
• Delayed Start
• WiFi Connectivity
• Pentair Home Mobile App for Smartphones
INSTALLATION
Cleaner and 60’ Communication
Cable w/ Swivel
Power Supply
Cleaner Caddy
STEP 1:
Caddy Placement
The cleaner comes with a cleaner caddy that
requires assembly before continuing further
into this section. See Caddy Assembly on page
3 for assembly instructions.
Position the caddy and power supply at least
12 feet (3.5 m) from the edge of the pool. See
Figure 1.
STEP 2:
Unroll Communication Cable
Unroll the communication cable and stretch
it out completely so there are no kinks. See
Figure 2.
Initial Setup
Before using the cleaner for the first time, perform the following procedures:
FIGURE 2
3.5 m / 12 ft
FIGURE 1