Pentair PROWLER 930W - Pair Prowler to Pentair Home Account

PROWLER® 930W Robotic Inground Pool Cleaner Installation and Maintenance Guide
3
Caddy Assembly
To assemble the caddy, follow the
instructions below:
STEP 1:
Removing the Communication Cable Holder
1. While holding the caddy chassis in place,
pull the top of the communication cable
holder straight out until it snaps loose. See
Figure 6.
2. Place the attachment to the side. It will be
reinstalled in Step 4.
FIGURE 6
STEP 2:
Installing the Wheels
1. Using two of the shorter Phillips-head screws
provided with the caddy, secure both caddy
wheels to the chassis. See Figure 7.
FIGURE 7
STEP 3:
Installing the
Handle Support
1. Slide the handle
support into
the top of the
chassis and push
downwards firmly
until it seats into
the chassis. See
Figure 8.
Note: The handle
support seats
tightly into the
chassis and substantial force may be needed.
Ensure the support is seated all the way into
the chassis, otherwise the securing screws will
not line up correctly.
2. Using two of the shorter Phillips-head screws
provided with the caddy, secure the chassis to
the handle support. See Figure 9.
FIGURE 8
FIGURE 9
STEP 4:
Reinstall the Communication Cable Holder
1. Slide the bottom of communication cable
holder onto the front of the chassis.
2. While holding the chassis in place, push the
top of the cable holder inwards until it clicks
into place. See Figure 10.
B
A
FIGURE 10