15 / 84
industrial heat tracing solutions
EN-RaychemNGC30UIT2Programming-AR-H5818602/16
Step 4A: Go to Fig. 2.6 | ID pop-up window
Fig. 2.5 Setup|Circuit window
At initial start-up, the Setup|Circuit window automatically displays Circuit 1.
Step 4B: Press on the ID field and a pop-up window appears
Fig. 2.6 ID pop-up window
• The pop-up window is a text-editing window that works similar to cell phone text messaging.
There are selection keys for Upper Case Letters, Lower Case Letters, and Special Characters.
The keypad portion allows you to enter text by pushing the appropriate keys.
• For this example, Pipe #1 was entered for the ID tag.
• Press Enter when done.
To Next Page
Loading...
