1
REBEL™ Suction Side Pool Cleaner Installation and User’s Guide
POOL PREPARATION
1. Rebel cleaner body
2. Hose float
3. Threaded Adaptor
4. Reducer Cone
5. Regulator valve
6. Elbow
7. Flow gauge
8. Hose Set – 11 Sections
-10 Standard Hoses
-1 Leader Hose
Cleaner Components
Remove the cleaner and all parts from the box. Check to be sure all components are included.
Pool Preparation
Before installing the Rebel™ Suction Side Pool Cleaner, your pool should be clean and algae-free so as to not
inhibit the cleaner’s traction. If necessary, make the following preparations before proceeding:
1. Chemically balance the pool water.
2. Brush pool and let the debris settle.
3. Hand vacuum thoroughly.
4. Clean filter and pump strainer basket.
1.
2.
Standard Hose
Leader Hose
8.
Figure 1
7
5
4
6
3
To Next Page
Loading...
