Pentair Sta-rite INTELLIPRO - Setting Speeds 1-8; Pump Operating Modes

11
INTELLIPRO
®
Variable Speed Pump Installation and User’s GuideINTELLIPRO
®
Variable Speed Pump Installation and User’s Guide
Pump Menu: Speeds 1-8
SPEED 1-8
Speed 1 (1-4)
Manual
Schedule
Egg Timer
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Speed 5 (5-8)
Schedule
Set Speed
Set Start Time
Set Stop Time
Disabled
Default: Disabled
MENU
Pump Operating Modes
The IntelliPro
®
Variable Speed Pump can be
programmed in three different modes:
Manual, Schedule, and Egg Timer
.Speeds1-4can
beprogrammedinallthreemodes.Speeds5-8can
only be programmed in Schedule mode since there are
nobuttonsonthecontrolpanelforSpeeds5-8.The
defaultsettingforSpeeds5-8is“Disabled”.
Set Speeds in Manual or Egg Timer Mode
(Speeds 1-4 Only)
1. Press Menu.
2. Use Up or Down arrows to scroll to“Speed 1-8”,
then press Select.
3. UseUp or Downarrowstondthespeed(1-4)you
wish to program.
4. Press Select. Speeds1-4defaultsettingis
Manual.TosetaspeedinManualmode,pressthe
Downarrow(“SetSpeed”willdisplay)andpress
Select tochange.UsetheUp or Down arrow to
adjustspeed.
5. Press Enter to save the new speed setting.
Continue below to Step 6 to set a speed in Egg
Timer mode.
6. Press Select and scroll to “Egg Timer”.
Press Enter.
7. Press the Down arrow to display “Time”.
8. Press Select andusearrowkeystoadjusttime.
9. Press Enter to save the new time setting.
10. Press Escape to exit.
Speed 1 (1-4)
Manual
Schedule
Egg Timer
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Speed 5 (5-8)
Schedule
Set Speed
Set Start Time
Set Stop Time
Disabled
Default: Disabled
• Manual:AssignsaspeedtooneofthefourSpeed
buttons on the control panel. This mode can only be
usedforspeeds1-4.
TooperateinManualmode,pressoneofthefour
speed buttonsand then press the Start/Stop but-
ton. The pump will run the assigned speed for that
speed button.
• Egg Timer: Speeds1-4canbeprogrammedtorun
for a duration of time once a speed button is pressed.
To operate in Egg Timer mode, press a speed but-
ton and then press Start/Stop.The pump will run
that speed for the set amount of time and then turn
off.
• Schedule: Program speeds 1-8 start and stop at
a specic time during a 24 hour period. Speeds
programmed in Schedule mode will override any
manuallyselectedspeed(speedssetbymanually
pressing any of the speed buttons on the control
panel).
12:15p
Egg Timer
Time
12:15p
Manual
Set Speed
ManualModeMenuScreen
EggTimerMenuScreen