Pentair Sta-rite INTELLIPRO - Operator Control Panel Quick Reference

28
INTELLIPRO
®
Variable Speed Pump Installation and User’s Guide
Operator Control Panel: Pump Menu Quick Reference Guide
Press MENU button to access menus
(1-16) Default: ADDRESS 1
(hr:mm) Default: 12:00 AM
AM/PM
24 hr.
Fahrenheit - Default: F°
C° Celsius
(1-5) Default 3
(450 RPM - 1700 RPM) - Default: 450 RPM
(1900 RPM - 3450 RPM) - Default: 3450 RPM
Password Time Out (1 min. - 6 hours) Default:10 minutes
Disabled/Enabled - Default: Disabled
Enter Password (xxxx) Default: 1234
Manual
Schedule
Egg Timer
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Speed - Default: 750 RPM
Speed - Default: 1500 RPM
Set Speed (450 -3450 RPM) Default: 3450 RPM
Time (1 min. to 10 hrs.) Default: 10 minutes
Time Out Duration (1 min. to 10 hrs.) Default: 3 hours
(1 min. to 30 min.) Default: 11 minutes
Disabled / Enabled - Default: Enabled
Speed - Default: 2350 RPM
Speed - Default: 3110 RPM
English - Default: English
Schedule
Set Speed
Set Start Time
Set Stop Time
Disabled
Default: Disabled
Default: Enabled
(1 - 100%) Default: 1
(1 second - 10 minutes) Default: 20 seconds
40° F - 50° F (4.4° C - 10° C) Default: 40° F (4.4° C)
Set Speed (450 RPM - 3450 RPM) Default 1000 RPM
SETTINGS
MENU
SPEED 1-8
EXT CONTROL
FEATURES
PRIMING
ANTI FREEZE
Français
Español
Nederlands
Italiano
Português
Deutsch
Set AM/PM
Pump Address
Set Time
Temperature Unit
Screen Contrast
Language
Set Min Speed
Set Max Speed
PASSWORD
Speed 1 (1-4)
Program 1
Program 2
Quick Clean
Time Out
DISABLED/ENABLED
MAX PRIMING TIME
Program 3
Program 4
Speed 5 (5-8)
PRIMED SENSITIVITY
PRIMING DELAY
DISABLED/ENABLED
SET SPEED
PUMP TEMPERATURE
(pages 8-10)
(pages 11-12)
(page 12)
(page 13)
(pages 13-15)
(page 16)