Diaphragm Valve Face Piping Kit Installation Manual Pg. 24 of 52
5/31/12 Rev. F
3.2 Semi-Automatic Controller (CM200) – Dual Tank Installation
The dual tank semi-automatic controller kit consists of the following:
(1) Controller gauge panel
(3) 3/8” OD tube quick connect tees
(3) 3/8” OD x ¼” MNPT quick connect
fittings
(1) Check valve w/ fittings
(1) And/Or Valve
(100 ft) 3/8” OD polyethylene tube
Please refer to steps 1 & 2 of “Semi-Automatic Controller (CM200) – Single Tank Installation” for
mounting of the gauge panel assembly to the filter system.
To Next Page
Loading...
