Diaphragm Valve Face Piping Kit Installation Manual Pg. 27 of 52
5/31/12 Rev. F
3.3 Automatic Controller (CA100) - Single Tank Installation
The single tank automatic controller kit consists of the following:
(1) Automatic controller enclosure
(1) Multiport valve enclosure
(4) 3/8” OD tube quick connect tees
(3) 3/8” OD x ¼” MNPT quick connect
fittings
(1) Check valve w/ fittings
(100 ft) 3/8” OD polyethylene tube
(4pr.) Mounting brackets and hardware
(1) Owner’s/Operator’s manual for
automatic controller
Verify that all parts listed above were supplied before beginning installation. Replacement parts
can be ordered through a Stark distributor.
To Next Page
Loading...
