Pentax 3 - Page 65

Chapter 5 - Reference
Indicator Lights
The indicator lights tell you about the current status of the printer.
Indicator Light Table = Solid =Blinking
= Alternating Blinking
POWER DATA ERROR = Doesn’t matter
External power in use
Battery in use, > 14.0 Volts
Battery in use, > 13.1 Volts
Battery in use, > 10.0 Volts
Battery in use, > 6.6 Volts
Battery is discharging
Battery is charging
Printer is receiving data
Unprinted data remains in buffer
Printer is receiving flash upgrade
Printer is in “service” mode
Printer ready to receive flash data
Printer is receiving flash data
Printer storing flash data to flash
Page 53