Pentax 3 - Chapter 8 - Ordering Information

Electrical
Pentax AC Power Supply Input: 100~240 VAC, 50~60 Hz
1 A Maximum
Output: 15 VDC
Alternate Power Sources DC: 10.0~14.4V from NiMH battery
DC: 10~17 VDC from an external source
Printer Power Connector EIAJ RC-6705 Type A (2.1mm b
arrel
connector)
Power Usage @ 14.4 VDC Operating: 2.6A continuous (37 watts)
3.5A peak (50 watts)
Standby: 0.02A (1.1 watts-externally
powered, printer powered
off)
Battery Type and Rating NiMH, 14.4 VDC, 360mAH
Battery Yield Over 100 pages per full 100% charge, tested
at 68 degrees F (20 degrees C) with 5%
print
density per page. (Depending on page
density setting)
Battery Charging Circuit 250mA charge (on demand), otherwise,
continuous 20mA trickle charge
Regulatory
EMI FCC Class B and CE
EN50081
EN50082 Class B
Safety (Power Supply) CE EN60950
ERL (European UL Testing) to UL1950
See Declarations of Conformity for
additional details.
Page 65