Pentax 645 Z - LCD Display; LCD Display Settings; USB Connection; HDMI out

R30
Set-up Menu
D
Sets the general display settings for
the LCD display.
The following settings are available.
Adjusts the brightness, saturation and
the color of the monitor (B-A, G-M).
Available operations
Set the USB connection mode (MSC or PTP) when connecting
this camera to a computer via a commercially available USB
cable.
Memo
• Refer to the “Operating Manual” to connect the camera to a
computer. (w p.87)
Set the output format of the HDMI terminal.
Memo
• When the HDMI output format is set to [1080i] or [720p], the display
may appear with a screen design that differs from that of the
camera.
LCD Display
D1
Guide Display
Displays the operation guides when the exposure mode is
changed.
Auto Screen
Rotation
Displays the status screen and control panel vertically if
the camera is held vertically.
Display Color
Sets the display color of the status screen, control panel
and menu cursor.
LCD Display Settings
D1
AB Selects an item.
CD Adjusts the value (15 levels for each item).
M Resets the adjustment value.
R Displays a captured image in the background so you
can adjust the color while viewing the image.
LCD Disp lay
LCD Display
Guide Display
Guide Display
Auto Screen Rotation
Auto Screen Rotation
Display Color
Display Color
F
F
5.6
5.6
1/
1/
125
125
1
1
LCD Disp lay Settings
LCD Display Settings
± 0
± 0
Brightness Level
Brightness Level
Cancel
Cancel
OK
OK
MENU
USB Connection
D2
HDMI Out
D2
Auto
The maximum resolution supported by the AV device and
camera is automatically selected.
1080i 1920×1080i
720p 1280×720p
576p 1280×576p
480p 720×480p