R39
Custom Setting menu
E
E Custom Setting Menu
Sets the step interval for exposure.
Sets whether to adjust the sensitivity in increments of 1 EV step
or in accordance with the [EV Steps] setting for exposure.
Select from [10sec.], [20sec.], [30sec.] or [Continue] for the
exposure metering time. If [Continue] is selected, metering
continues until the shutter release button is pressed fully or the
camera is turned off.
Exposure is locked when focus is locked.
The metering point and the AF point can be linked when the
metering mode is set to A (Multi-segment), or when the
focusing area selection mode is set to E (Select) and the
metering mode is set to C (Spot). Exposure is adjusted in
accordance with the position of the selected AF point.
Compensates automatically when the proper exposure cannot
be determined.
Sets the function of the shutter release button in M mode.
• The camera operates in the same manner when shooting with a
remote control unit.
1. EV Steps
E1
Setting Exposure Setting Value
1/3 EV Steps
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0, ±3.3,
±3.7, ±4.0, ±4.3, ±4.7, ±5.0
1/2 EV Steps ±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0, ±3.5, ±4.0, ±4.5, ±5.0
2. Sensitivity Steps
E1
3. Meter Operating Time
E1
4. AE-L with AF Locked
E1
5. Link AE and AF Point
E1
6. Auto EV Compensation
E1
7. Bulb (B) Mode Options
E1
Type1 Continuous exposure while the shutter release button is pressed.
Type2
Press the shutter release button to start exposure, and press it
again to end exposure.
To Next Page
Loading...
