Pentax 645N - Page 22

(NoLWWHVdaud) NOLVH3dO SISva 1
5.Wind the leader paper to the take-up spool
until arrow marking on the leader paper aligns
with the holder's start mark S and the red line.
6. Attach the film holder to the camera body.
7. Set the main switch to [ON] or [ «)]. Release
the shutter. The film automatically advances
to the first frame. [ | ] is displayed on the LCD
panel.
8.If the [ £ ] appears, indicating that the film is
not properly loaded. Detach the film holder
from the camera and load the film once again.