Pentax Camera - Page 22

o
Lightly rotate the film rewinding
knob until
any
slack is
taken
up,
and confirm that the film
is
properly
fitted
between
both
guide
rails. Close the back
cover tightly.
o
Advance the
film
wind lever
to
check
that the
red vertical
stripes
of
the
film
wind/rewind indicator
flicker;
this indicates
that the
film
is advancing
properly.
Film
advance
can
be
also
checked
by
the
rotation
of the rewinding
knob.
o
Repeat
shutter-tripping/f ilm-advancing
operation
until
the
exposure counter reaches
to
"0".
The
next
frame
is ready
for
the
first
shot.
www.orphancameras.com