Pentax HIDROMATIC H1 User Manual

GB
7. WARRANTY
The warranty is valid for a period of 24 months starting from the purchasing
date. The warranty is acknowledged if the device shows no signs of
tampering and if all the manufacturer’s instructions were followed during the
installing and operating phases
8. POSSIBLE PROBLEMS
PROBLEM
POSSIBLE CAUSES
SOLUTION
The pump switches on
and off continuously.
Leaks in the system.
Check all hydraulic
connections.
Dry stop even if there
is water in the suction
pipe.
Operating pressure too high.
Turn screw 5
anticlockwise (-) direction.
Press the RESET button
and make sure the red
light is off when the pump
stops.
The pump do not start
again.
1.Mains voltage failure.
2.The drop between the
Hidromatic and one of the tap
is too great.
3.The pump is out of order.
4.Hidromatic is
malfunctioning.
1.Check the electrical
connections.
2.Turn screw 5 in
clockwise (+) to increase
the operating pressure.
3.Consult an electrician.
4.Consult your dealer.
The pump does not
stop.
1.There are big leaks in the
system.
2.Hidroamtic is
malfunctioning.
1.Check the system.
2. Consult your dealer.

Pentax HIDROMATIC H1 Specifications

General

Brand	Pentax
Model	HIDROMATIC H1
Category	Water Pump
Language	English