Pentax IQZoom 135 M - Troubleshooting; Shutter Release Issues; Picture Clarity Problems; Automatic Power Off

TROUBLESHOOTING
What appears troublesome may be easily remedied. Here are some problems that may
occur and their remedies.
SymptiMm
1. The shutter cannot be released.
• Is the main switch turned OFF? If so, turn It ON. See page 9.
• Is the battery exhausted? Insert new battery. See page 8.
• Is (0) blinking on the LCD panel? The film has been used up.
Insert a new roll. See page 12.
• Is (f) blinking on the LCD panel? The film has not been
loaded properly. Reload the film. See page 13.
2. My printed pictures don't look
very clear.
• Did you position the autofocus frame on your subject? See
page 18.
• Did you obstruct the autofocus window with your fingers, hair
or other object. See page 16.
• Is the autofocus window dirty? Wipe it off. See page 18.
3. Zoom lens retracted automati¬
cally (the power is turned off
automatically)
• The power is automatically switched OFF if the camera is left
unused for over 3 minutes. See page 9.
• When the camera is ON and left unused for more than 5 min¬
utes in the Remote Control shooting mode, the camera auto¬
matically switches itself OFF to save battery power. Turn the
power ON again. See page 32.
36