Pentax IQZoom 70 - Battery Management; Battery Insertion and Check

BATTERY
INSERTION AND
CHECK
1. Open
the
battery-chamber
cover
by
sliding
it
in
the direction of the arrow.
To insert
the
lithium battery,
unfold
the alkaline battery
guide
plate
as well.
2.
Insert the
lithium
battery
into
the
chamber
correctly as
indicated
and
close
the
cover.
This
camera is
powered
by
one
6V
lithium
battery:
Panasonic/National BR-P2, CR-P2p or Duracell
DL-223A, or
four
"AAA"-size alkaline batteries.
o
Manganese
batteries
can
also be
used, but
they
are
not recommended
because they
have far less
battery
life
than the alkaline or
lithium
battery.
4
3.
When using
alkaline batteries,
first
fold
down
the
alkaline
battery
guide
plate
and
insert
the
batteries
through the
guide's
holes
making
sure
the
(+)
and
(-)
sides
are correctly
placed
as
indicated
on the
guide
plate.
Do
not remove
the
plastic
tabs/ears
in
each battery
guide
hole
as
they
keep the
batteries
securely
in
place.
X
Battery
Check
As
you
turn
the main switch
on as shown
above,
the
lens
slightly extends
and simultaneously
the
lens
protector
opens,
which
indicates
that
the
battery
is
properly
loaded.
lf they
don't,
reload the
battery.
ffi
www.orphancameras.com