Setting
Live
View
You can set the
display
and autofocus mode for Live View.
1
Select
[Live
View] in
the
[0
Rec.
Mode
4]
menu
and
press
the four-way
controller
{...,.
).
The [Live View] screen appears.
2
Press
the
four-way
controller
(
~
)
and use the four-way
controller
{
£.
•)
to select
an autofocus
method.
Show
Grid
Info
Overlay
Histogram
Bright/Dark
Area
3
4
Gives autofocus priority to detected faces and performs
contrast autofocus. A yellow frame appears for a main
'"@,
L~..l
face (white frames appear for other faces), and
Face Detection
autofocus and automatic exposure are performed for
AF
the main face.
(default
setting)
The face detection is not performed when the focus
mode is set to
MF.
r"(),
L
..1
Displays
Live View and performs autofocus based on
Contrast AF
the information obtained from the image sensor.
Cancels
Live View and performs autofocus with the AF
..
sensor .
Phase Difference
If
the shutter release
button is pressed
halfway
during
AF
Live View, the Live View image
will
disappear and the
autofocus system operates. Once
focused, the Live
View image
will
be
displayed
again.
Press the
OK button.
Use the four-way
controller
(
£.
•)
to
select [Show
Grid]
and press the four-way
controller
{...,.
).
•
To Next Page
Loading...
