Setting
a File
Format
You can set the format of image
files.
Captures images
in
JPEG format. (default setting)
JPEG
You can change the number
of
recorded
pixels
in
[JPEG Recorded
Pixels]
and the image
quality level
in
[JPEG Quality].
RAW format
is
a
CMOS
sensor output format saved without
processing.
Effects
of
White
Balance,
Custom
Image
and
Color Space
are not
RAW
applied to the captured images, but they are saved as
actual
original
information. When you perform the development process by using the
[RAW Development] function (p.238), you can create JPEG images
with these effects.
Images
are saved
in
both RAW and JPEG formats.
RAW+
When [One Push
File
Format] is assigned to the
RAW/Fx
button, you
can press the
RAW
/Fx
button to temporarily change the file
format and
save
an
image
in
both
file
formats. (p.181)
1[§).
When Extended Bracketing, Digital Filter, HDR Capture or Cross Processing is
set, the file format is set to [JPEG] and cannot be changed. To change the file
format, turn these functions off.
en
::r
0
0
~
- -
----
--
- - -
---
--
-
--
- - -
--
--·--
Select
[File
Format]
in
the
[0
Rec.
Mode
1]
menu
and
press
the
four-way
controller
(..,..
).
2
Use the four-way
controller
(
•
T)
to
select
a
file
format.
When the
file
format
is
changed, the
number of
recordable
images appears at
the top right of the screen.
3 Press
the
OK
button.
4
Press
the
MENU
button.
The camera
is
ready to take a picture.
File
Format
JPEG Recorded
Pixels
JPEG
Quality
AF
Settings
Lens
Correction
To Next Page
Loading...
