Selecting•theHDMIOutput Format
By default, the maximum resolution is automatically selected to suit the AV
device and camera. However, if it fails to play back images properly,
change the HOM I output format setting.
1
Select
[HOM I
Out]
in
the
['
Set-up
2]
menu
and
press
the
four-way controller
(..,..
).
2 Use
the
four-way
controller
(
.&.
'f')
to select the HDMI output format.
The maximum resolution that
Auto
the AV device and camera
support is automatically
selected. (default setting)
1080i
1920x1080i
720p
1280x720p
480p
*
1
720x480p
Brightness
Level
LCD
Color
Tuning
Video Out
HDMI Out
USB
Connection
Folder
Name
Create New Folder
*1
This depends on the selected video output format; [480p] for NTSC and [576p]
(720x576p) for PAL.
3 Press the
OK
button.
4 Press the MENU button.
The screen that was displayed before selecting the menu appears again.
\.n;;~c,
• When the HOM I output format is set to
[1
080i] or [720p], the display
of
the AV
device may appear with a screen design that differs from that displayed on
the camera.
• The BrighUDark Area warning is not displayed during Live View.
• When the exposure mode is set to
.!! (Movie), the output format
is
fixed to
[480p] regardless
of
the HOM I output format setting.
-
To Next Page
Loading...
