Pentax K-5 II S - Page 249

You can set the functions for when the e-dials are turned, when the
RAW/Fx button, AF button or Preview dial is operated, and when the
shutter release button is pressed halfway.
The current functions assigned to the buttons/dials can be checked with
guide display. (p.25)
Setting the Functions for the E-dials
For each exposure mode, you can set the functions for when the front and
rear e-dials and
® button are operated.
1 Select [E-Dial Programming] in the [0 Rec. Mode 5] menu
and press the four-way controller { ~ ).
The [E-Dial Programming 1] screen appears.
2 Use the four-way controller
{ • T) to select an exposure
mode.
Turn the rear e-dial c·#~~ ... ) to display the
[E-Dial Programming
2] screen.
3 Press the four-way controller ( ~ ).
E-Dial Programming 1 :~2
-~~Tv ~~ .... Av e -+ P ~
Sv .... ~ .. -· - .. ~ .. -ISO @· ·
TV-~"-TV - .. ~ .. --- @·-
Av-~ .. -- - .. ~ .... Av @--
TAv .. ~~Tv .... ~ .... Av @p LINE
The screen for the selected exposure mode appears.
4 Press the four-way controller ( ~)
and use the four-way controller
(• T) to select a function.
You can perform the following settings for
each exposure mode.
-
0
:::T
I»
::s
(Q
-·
::s
(Q
)>
Q.
Q.
a:
0
::s
I»
-