2
Fully
display
a
white
wall
or
other
bright subject with no
detail
in
the viewfinder and press the
shutter release
button
fully.
After image processing is performed, the
Dust
Alert image appears.
If
the message [The operation could
not
be
completed correctly]
is
displayed,
Dust
Alert
Checks
for
dust
on the sensor.
Press
shutter
release
button
to reveal
dust
location
press the
OK
button and take another picture.
3
Check the sensor for dust.
Available
operations
4
Press the OK
button.
Displays the Dust
Alert
image at
full screen
display.
The Dust
Alert
image is saved and the camera returns to the
[~
Set-up
4] menu.
~;~ci
Regardless
of the camera settings, the Dust
Alert
image
will
be
taken with
·
·
·~~,;~"
specific shooting conditions.
To Next Page
Loading...
