Pentax K-5 II S - Page 308

Displaying the Distance and Direction to the
Destination
(Simple
Navigation)
Saving the Destination
You
can save the
GPS
location information stored in an image as the
destination
for
Simple
Navigation.
Up
to 38 destinations can be saved.
1
Press
the
four-way
controller
(
T)
in
Playback
mode.
The playback mode palette
appears.
2
Use
the
four-way
controller
(.A
T
<Ill
~
)
to
select
~
(Save
Destination) and press the
OK
button.
The screen to select an image appears and the
GPS
location information
stored
in
the image is displayed.
If
there are no images that have
GPS location information stored, [No
image can
be
processed] appears.
3 Use
the
four-way
controller
(
<Ill
~
)
to
select
the image with the
GPS
location information you want to
set as a destination, and press
the
OK
button.
4
The [Destination Name] screen appears.
Enter the name of the destination to save.
Enter the name
in
the same way as [Copyright Information]. Refer to
Step
4
on p.269.
Up to 18 single-byte characters can be entered.
When the name is set, the screen to save the destination data
in
the
destination list
appears.