While
direct key operation is enabled,
the guide indicators for the direct keys
are
displayed
in
blue
(when
[Status Screen]
(p.258)
in
the
['
Set-up
1]
menu
is set to
[Display Color
1 ]). Direct key operation is not
available
when the AF
point switching
dial
is set to
SEL
and the AF point
is
being changed.
In
such
cases, press and
hold
the
OK
button. (p.114)
Using the
Control Panel
While shooting, the current settings can be checked on the status screen.
You can
also switch the display to the control panel and change settings.
Following,
how
to set [JPEG Quality] is explained as an example.
1
Check the status screen and then
press the
INFO button.
The control panel appears.
Press the
INFO
button when the status
screen is not displayed.
2
Use
the
four-way
controller
(
•
"Y
_....
...,.
) to select
an
item you
want to change the setting for.
Items
that cannot be changed for the
current camera settings appear grayed
out and cannot be selected.
3
Use
the
front
e-dial
(
..
~
..
)or
rear
e-dial
(
..
#~~-)to
change the
setting.
•
To Next Page
Loading...
