•
Attach a proper lens to the camera's body.
When you use one
of
the following lenses with this camera, all the
camera's exposure modes will
be
available.
(a) DA, DA
L,
D
FA,
FA
J
lenses
(b) Lenses with
an
A (Auto) position, when used
in
the A
position
•
Turn the camera off before attaching or removing the lens
to prevent
unexpected
lens
movement.
•
When attaching or removing a
lens,
choose
an
environment that is relatively
free of dirt and dust.
•
Keep the body mount cover on the camera when a
lens
is not attached.
•
Be sure to attach the lens mount cover and
lens
cap to the
lens after
removing the
lens
from the camera.
• The camera body and
lens
mount incorporate lens
information contacts and
an
AF
coupler.
Dirt, dust, or corrosion may damage the electrical
system.
When necessary,
clean
the contacts with a soft dry
cloth.
•
When
lenses
described
in
(b) are used
in
a position other than
A,
some
functions
will
be restricted. Refer to
"Using
the Aperture
Ring"
(p.299).
• With factory
default setting, the camera
will not work with
lenses
other than
those
listed
above and accessories.
Set
[27. Using Aperture Ring] to
[Permitted]
in
the
[C
Custom Setting 4] menu to use them. (p.299)
•
We assume no
responsibility
nor
liability
for accidents, damages and
malfunctions resulting
from the use
of
lenses
made by other manufacturers.
f
Make sure the camera
is
turned off.
2 Remove the
body
mount
cover
(G)) and
lens
mount cover
(®).
Be sure to put the lens down with the lens
mount side facing upward to protect the
lens mount from damage when there is
no lens mount cover on the lens.
To Next Page
Loading...
