Pentax K-5 II S - Page 74

OJ
S»
tn
n
0
"C
CD
..,
S»
~
0
::1
tn
Using Built-in Flash
1 Press the
~
button.
2
The built-in flash
pops up and begins
charging. When the
flash is
fully
charged,
~
appears
in
the viewfinder and on the
LCD panel. (p.36, p.38)
Press the shutter
release
button fully.
The picture is taken.
When the mode
dial
is at
.,
the
flash
is
not discharged if the
lighting
conditions do not require flash for correction even when the
flash
is
popped up.
[Flash On]
is
used if the
flash
is popped up when the mode
dial
is
at a
position other than
•.
3 Push
down
on the
portion
indicated
in
the
illustration
to
retract the
built-in flash.