118
Shooting Functions
4
When an image is tilted, it can be corrected up to a maximum of ±1.0
degrees (when Shake Reduction is turned on).
1
Select [Horizon Correction] in the [A Rec. Mode 3] menu.
2
Use the four-way controller (45)
to select P (Off) or O (On).
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
4
Aim the camera at the subject, and press the shutter
release button halfway.
When [Horizon Correction] is set to On by selecting the check box, the
following indicators appear on the status screen or Live View screen.
Correcting the Tilt of the Images
D Shake Reduction On + Horizon Correction On
E Shake Reduction Off + Horizon Correction On
High-ISO NRHigh-ISO NR
Slow Shutter Speed NRSlow Shutter Speed NR
MENU
123 4
Shake ReductionShake Reduction
Input Focal LengthInput Focal Length
ExitExit
Composition Adjust.Composition Adjust.
Electronic LevelElectronic Level
Horizon CorrectionHorizon Correction
To Next Page
Loading...
