Pentax K-50 - Protecting Images from Deletion (Protect)

222
Changing Additional Settings
7
You can protect images from being accidentally deleted.
1 Press the four-way controller (3) in the single image
display of playback mode.
The playback mode palette appears.
2 Use the four-way controller (2345) to select Z
(Protect), and press the 4 button.
The screen to select how to change the settings is displayed.
3
Use the four-way controller (23)
to select [Single image] or [All
images], and press the 4
button.
If you selected [All images], proceed to
Step 5.
4 Turn the front e-dial (R) to select an image.
5 Press the four-way controller (2)
to select [Protect], and press the
4 button.
Select [Unprotect] to cancel the
protection of the image.
The image is protected and the Y icon
appears at the top right of the screen.
Repeat Steps 4 and 5 to protect other
images.
If you selected [All images] in Step 3, the camera returns to the single
image display.
6 Press the 3 button.
The camera returns to the single image display.
Protecting Images from Deletion (Protect)
Even protected images are deleted if the inserted SD Memory Card is
formatted.
MENU
OKOK
OK
Single imageSingle image
All imagesAll images
MENU
OK
OK
OK
Protect
Protect
Unprotect
Unprotect
Exit
Exit
100-0001
100-0001