130
Shooting Functions
4
3
Use the four-way controller (45)
to select a focusing area.
4
Press the 4 button.
The camera is ready to take a picture.
1
Set the focusing area to S and
press the 4 button.
The camera is ready to take a picture.
• You can also change the setting from the [A Rec. Mode 1] menu (p.87).
• AF point(s) are not illuminated red in the viewfinder when [Off] is selected for
[8. Superimpose AF Area] in the [A Custom Setting 2] menu.
• The focusing area is fixed to O regardless of this setting when using lenses
other than DA, DA L, D FA, FA J, FA or F lenses.
Setting the Focus Position in the AF Frame
Select AF Point
Auto (5 AF Points)
MENU
AUTO
Cancel OK
OK
Select AF Point
MENU
Cancel OK
OK
Select
To Next Page
Loading...
