Pentax Optio 330 GS - Powering the Camera; Inserting the Battery

memo
Caution
Inserting the Battery
Insert the battery into the camera. Use two size AA alkaline
batteries, two size AA nickel batteries, two size AA nickel
hydride batteries, two size AA lithium batteries or one CR-V3
lithium battery pack.
z
Slide the battery chamber cover in the direction
indicated by arrow and lift it up.
x
Insert the battery in the direction indicated by the (+) (–)
marks inside the battery chamber.
c
Close the battery chamber cover and slide it back into
place.
• If you intend to use the camera for a long period, use of the
AC adapter D-AC5 (optional) is recommended. (
☞
p.12)
• Do not open the battery chamber cover or remove the
battery when the camera is turned on.
• If you do not intend to use the camera for a long time,
remove the battery.
• If the camera is left without the battery for a long time,
the date setting will be reset.
• Insert the battery correctly. If the battery is incorrectly
oriented, it may cause a malfunction.
10
Powering the Camera
Getting Started