Taking Still Pictures
20
Quick Start
Quick Start
For the simplest procedure to take still pictures:
The flash fires automatically depending on the light conditions.
z
Press the power switch.
The camera will turn on.
x
Set the mode dial to .
c
Confirm the subject and
shooting information on the
LCD monitor.
The focus frame in the middle
of the LCD monitor indicates
the zone of automatic focusing.
You can change the size of the
subject by pressing the Zoom
button.
: makes the subject bigger.
: makes the subject smaller.
You can check the size of the subject by looking through
the viewfinder.
As there is no focus frame in the viewfinder, be sure to check
the focusing area on the LCD monitor.
memo
Zoom / / button
Power switch
Viewfinder
LCD monitor
Display button
200
11:19 11:19
200
10/23/200210/23/2002
Focus Frame
Shutter release
button
Mode dial
Power switch
To Next Page
Loading...
