77
Playback/Erasing
Viewing Images on a TV
By using the video cable, you can capture and play back
images on a TV or other equipment with a video IN jack. Make
sure that both the TV and the camera are turned off before
connecting the cable.
z
Open the terminal cover and connect the video cable.
x
Connect the other end of the video cable to the image
input terminal of the TV.
c
Turn the TV and camera on.
Changing the Video Output Format
☞
p.97
The LCD monitor is always turned off when the camera is
connected to a TV.
If you intend to use the camera for a long time, use of the AC
adapter (optional) is recommended. Refer to the operating
manual for the TV or equipment to which the camera is
connected.
To Next Page
Loading...
