Pentax Optio 330 GS - Disconnecting Your Camera from Your PC

88
Playback/Erasing
Disconnecting your camera from your PC
Disconnecting the camera from your PC (Windows 2000)
z
Double click the [Unplug or
eject hardware] icon in the
task bar recognized area.
The [Remove Hardware]
screen will appear.
x
Make sure [PENTAX USB
Disk Device] is selected and
click [Stop].
[Stop Hardware Device]
screen will appear.
c
Make sure [PENTAX USB
Disk Device] is selected and
click [OK].
A message will appear.
v
Click [OK].
b
Turn off the camera and
disconnect the USB cable
from your computer and
camera.
For Windows 98/98SE/Me, there is no Hot Plug icon. When
removing the camera, turn off the camera and disconnect the
USB cable.
memo