92
Playback/Erasing
Connecting the camera and your Macintosh
z
Turn on your Macintosh.
x
Turn off your camera and plug the USB cable into your
camera and into an available USB port on your
Macintosh.
c
Turn on your camera.
The camera will be detected as
[untitled] on the desktop. The folder
name can be changed as desired.
• Although images can be viewed and printed, image data is in
the CF card in the camera. To save the image data in the CF
card to another medium, refer to the instruction manual of
your Macintosh and move or copy files.
• You can edit images on your Macintosh after moving or
copying files there.
• If the CF card has a volume label attached, the content of the
volume label will be displayed instead of [Removable Disk]. If
the CF card is new and has not been formatted, the
manufacturer and capacity of the card will be displayed.
To Next Page
Loading...
