2
1 I
} Battery / card cover m Battery
_4_J [ _ _ lever
Install the battery provided. When using the camera for the first time,
charge the battery before installing.
1 Slide the battery ! card cover in the direction indicated
by the arrow to open the battery ! card cover.
2 Insert the battery with the label facing towards the lens
while using the side of the battery to press the battery
lock lever in the direction indicated by the arrow.
Check that it is firmly secured by the battery lock lever when you have
inserted the battery.
3 Close the battery cover.
To remove the battery, release the battery by using your finger to
press the battery lock lever in the same direction as when you
inserted the battery, and pull the battery out.
Use of the AC adapter D-AC7 (optional) _srecommended when you
intend to use the camera continuously for a leng period. (_ p.15)
• The rechargeabJe lithium-ion battery D-LI7 is exclusively for powering
this camera. If you use any other battery the camera may be
damaged or malfunction.
• Do not remove the battery when the camera _sturned on
• If you do not intend to use the camera for a long time. remove the battery.
• If the camera is left without the battery for a long time, the date setting
will be reset.
• Insert the battery correctly. If the battery is incorrectly oriented, it may
cause malfunction.
To Next Page
Loading...
