iiiiiiiiiiiiiiiiiiiiii
HHHHHHHHHHH
HHHHHHHHHHH
HHHHHHHHHHH
HHHHHHHHHHH
HHHHHHHHHHH
sti,,imaoescanbep,ayedbackoneatatime,proceedinoeither iiiiii iiiiii
forward or backward.
1 Press the Playback button after taking a picture.
An image will be displayed on the LCD monitor.
2 Press the four-way controller (4 _ ).
(_ displays the previous image,
@displays the next image.
While the image is displayed, you can erase it by File No.
pressing the • button (The Delete screen will be
displayed.), press the four-way controller (A) to t_ 10c
select [Delete], and then pressing the OK button.
Press the Playback button or press the shutter
release button halfway to return to shooting
status.
• The camera turns on in Playback Only mode when you turn the
camera on while pressing the Playback button As the lens noes no[
extend in Playback Only mode this feature is useful when you want
[o 3ass the camera to someone and show them the 3Jcture you have
just taken. Turn the camera off and then turn it on again to switch to
[he Capture mode
• You can enlarge the image displayed on the LCD monitor by pressing
[he Zoom l[] O, button.
• When [he screen is changed to the playback screen, the image with
[he largest file number will be displayed first.
• In the case of movie pictures, the first frame will be displayed.
• If there are no images stored, the [No image & sound] message wilI
be displayed.
Zoom Display ,,7 p.89 _ q
Adding a Voice Memo ,,- p.v0
To Next Page
Loading...
