Pentax Optio S5i - Printing Using the DPOF Settings; Disconnecting the Camera from the Printer

112
6
Playback/Deleting/Editing
1 Use the four-way controller (23) to select
[Print w/DPOF settings].
2 Press the OK button.
The Print w/DPOF Settings screen will
appear.
Use the four-way controller (45) to check
the images and the print settings.
3 Press the OK button.
The print size selection screen will appear.
4 Use the four-way controller (45)
to choose the print size.
You can choose the print size from among
12 patterns: Setting (printer setting),
Card, L, 2L, Postcard, 100×150, 4"×6", 8"×10", Letter, 11"×17", A4, or
A3.
You cannot select a size that is not available with the printer you are
using.
5 Press the OK button.
Printing will start with the conditions you have set. Once printing
finishes, the screen will return to that of step 2.
Press the MENU button to stop printing halfway.
Disconnect the camera from the printer when you have finished printing.
1 Turn the camera off.
2 Disconnect the USB cable from the camera.
3 Disconnect the USB cable from the printer.
Printing Using the DPOF Settings
Disconnecting the Camera from the Printer
When you disconnect the USB cable from the camera, the camera
will be automatically turned off.
05
10
100-0010
100-0010
100-0010
MENU
OK
Exit
Exit
Exit OK
OK
OK
Copies
Total
Print w/DPOF settings
Print w/Printer settings
Print w/Printer settings
Paper Size
Paper Size
Setting
Setting
Print w/Printer settings
Paper Size
Setting
MENU
OK
Exit
Exit
Exit Print
Print
Print